DTF Station Transfer Film Sheets


  Clear selection

Product description

  • DTF (Direct to Film) use ONLY.
  • The DTF film works in any DTF printer
  • 100 sheets in a pack
  • Coated PET Film available in sheets
  • This single-sided coated film provides better printer roller traction with minimal static allowing for a great printed image without background artifacts


    1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
    2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo DTF Powder Shaker to apply powder with ease!
    3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
    4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
    5. After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
    6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

Related Products

DTF Station Transfer Film Sheets
You're viewing: DTF Station Transfer Film Sheets
Rated 0 out of 5