DTF Film Rolls (Cold/Warm Peel)


  Clear selection

Product description

  • High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
  • Hot Peel: Peel off the film without a long wait after the first press.
  • Single Side Matte: Easily distinguish the print side.
  • Compatible with: Any DTF printer on the market (Recommended use with a roll printer)


    1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
    2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo DTF Powder Shaker to apply powder with ease!
    3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
    4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
    5. After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
    6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

Related Products

DTF Film Rolls (Cold/Warm Peel)
You're viewing: DTF Film Rolls (Cold/Warm Peel)
Rated 0 out of 5